INTERTHERM Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. Drying Time. A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake. Consult International Marine’s INTERTHERM DATA SHEET brochure on NauticExpo. Page: 1/4.
|Published (Last):||18 November 2017|
|PDF File Size:||4.48 Mb|
|ePub File Size:||6.66 Mb|
|Price:||Free* [*Free Regsitration Required]|
As a light reflective finish for cargo holds, pipes, etc. VOC values are typical and are provided for guidance purposes only.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Consult your International Paint representative for the system best suited for the surfaces to be protected. Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Intertherm should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Intertherm must be applied within the overcoating intervals specified consult the relevant product data sheet. Areas of breakdown, damage etc. Intertherm may be applied directly over aged Intertherm following thorough fresh water washing and degreasing provided the coating to be overcoated is in an intact and tightly adherent condition.
Loose or flaking coatings should be removed back to a firm edge and Intertherm or an appropriate primer should be used to repair the area before application of the full coat.
This material intwrtherm a one pack coating and should always be mixed thoroughly with a power agitator before application. Use International GTA only in exceptional circumstances.
International Intertherm – Rawlins Paints
DO NOT thin more than allowed by local environmental legislation. Recommended Tip Range 0.
Thoroughly flush all equipment with GTA All unused material should be stored in tightly closed containers. Material should be filtered prior to use. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Prior to use, obtain, consult intertuerm follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Take precautions to avoid skin and eye contact ie. Actual safety measures are dependant on application methods and work environment. If Intertherm is used over a primer system the heat resistance may be determined by the primer system.
Over application of Intertherm can lead to blistering at high temperatures. Overcoating information interrtherm given for guidance only and is subject to regional variation depending upon local climate and environmental intertheem.
Consult your local International Paint representative for specific recommendations. Unmixed material in closed containers should be maintained in protected storage in accordance with the information given in the STORAGE section of this data sheet.
Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application guidelines.
Test performance inntertherm were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results actually found in all field environments. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
International Intertherm 891
Subject to reinspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. Prevent the ingress of moisture as this may lead to a pressure build up in the container. Marine Coatings Marine chemicals Marine lubricants.
Products Marine Coatings Marine chemicals Marine lubricants. Petersburg, Russia, phone: